Hubbellite Floors - Nothing Compares!
Hubbellite Type 100 Sanigenic is a 3/8" seamless, trowel-applied commercial and institutional flooring material containing cupric oxychloride cement. Hubbellite Type 100 Sanigenic flooring offers slip resistant properties with exceptional resilience for safety and comfort. Floors are long-lasting, economical, and easily maintained. Hubbellite Type 300 is a conductive, 1/2" thick, seamless, trowel-applied industrial flooring material containing carbon filled oxychloride cements. Hubbellite 300 is static disseminating, non-sparking, resilient and solvent resistant. The finished surface is a non-bleaching, non-fading black that is non-denting and non-dusting |
Basic Uses, Hubbellite 100:
Commercial Kitchens -- Institutional Kitchens -- Walk-In Freezers and Coolers -- Locker Rooms -- Meat and Poultry Processing Plants -- Food Processing Plants -- Area of Heavy Fork Truck and Lift Traffic -- Areas of Heavy Air Pallet Traffic
Basic Uses, Hubbellite 300:
Hazardous Material Storage Areas -- Ammunition and Ordnance Plants -- Paint Spray Rooms -- Munitions Storage Areas -- Film Processing Plants -- Electronic Assembly Areas -- Areas of Heavy Fork Truck, Fork Lift and Air Pallet Traffic
Other Uses For Hubbellite 100:
All areas where sanitation is of importance -- Over existing quarry tile (1/2") -- Over existing wood floors (1/2") -- Over old concrete (1/2") -- Over new concrete (3/8")
Other Uses For Hubbellite 300:
All areas where a non-dusting floor is required -- All areas subject to heavy loads -- Areas of likely solvent or petroleum spillage
Composition and Materials, Hubbellite 100:
Hubbellite Type 100 Sanigenic is derived from cupric oxychloride cement with additives to enhance its unique characteristics
Composition and Materials, Hubbellite 300:
Hubbellite Type 300 Conductive is derived from oxychloride cements with additives to enhance its unique characteristics
Limitations, Hubbellite 100:
Hubbellite Type 100 Sanigenic should not be used in free running water areas, in high concentration acid areas, for exterior use, or over lightweight fills
Limitations, Hubbellite 300:
Hubbellite Type 300 Conductive should not be used in high concentration acid areas, free running water areas, over lightweight fills, or for exterior use
Applicable Standards, Hubbellite 100:
Hubbellite Type 100 Sanigenic is approved by the United States Department of Agriculture (USDA). Hubbellite 100 fully complies with all OSHA safety standards
Applicable Standards, Hubbellite 300:
Hubbellite Type 300 Conductive meets the standards of NFPA Bulletin #56. Hubbellite 300 Conductive fully complies with all OSHA safety standards